Ammo Can AA Battery Organizer – 3D Printed Battery Storage Box, Holds 18 AA
Your spare AA batteries, stored like ammunition. This little olive drab box is styled after a classic .50 cal ammo can, right down to the side ribs, the hook hinge and the latch lever, and it holds 18 AA cells standing upright, ready to grab.
It's a working box, not just a look. The lid hinges like the real thing, snaps shut over a latch bead so it stays closed, and has hold-down ribs inside so a full box can be shaken or tossed in a drawer without the cells jumping out.
Details
- Holds 18 AA batteries upright in a 6 × 3 grid, so you can see at a glance how many you have left
- Size: about 4.2 × 2.2 × 2.3 in (106 × 56 × 59 mm) closed; 4.6 in (116 mm) long counting the hinge and latch lever
- Hook hinge like a real ammo can: shut, the lid can't come off; stood upright, it lifts straight off and drops back on
- Snap latch: closes easily and stays shut. Lift the thumb tab to open
- Hold-down ribs under the lid keep cells seated when the box is carried or shaken
- Easy-out pockets: each pocket has a hole underneath. Poke the first cell up with a fingertip or pen and the rest come out easily
- 3D printed in olive drab PLA. Batteries not included
Good for
The junk drawer, the workbench, the game shelf (controllers and remotes eat AAs), an emergency kit, or the desk of anyone who likes military surplus style. It makes a fun, useful stocking stuffer or white elephant gift.
Handmade note
Each box is 3D printed to order and finished by hand in our shop. You'll see fine horizontal layer lines on the surface. That's part of how it's made, not a flaw. This is a decorative storage box in the style of an ammo can; it is not a real ammunition container.
Care
Wipe clean with a dry or damp cloth. Keep out of hot cars and direct sun: PLA can soften above about 140°F (60°C).




